News

Tubular folding carton structure and size specifications

Update:Dec 18,2017
Summary:

(1) Paste the wing chamfer angle: 10 * 15. (2) Locking […]

(1) Paste the wing chamfer angle: 10 * 15.
(2) Locking / Sealing The width of the main flap is reduced by 0.80mm or cardboard thickness.
(3) Cut lock / insert tongue Fold amount of the wing: usually 0.8mm or cardboard thickness.
(4) Seam Lock / Dust Shield (Seam Flap) Shoulder: Varies depending on the paper tray size and I or board thickness.
(5) Cut lock / main dust wing (sealing ailerons) angle: generally 45
(6) Cut lock / secondary dust wing (seal ailerons) Angle: generally 15.
(7) Dust protection flap (sealing aileron) Indentation: Normally ... 8111111 or cardboard thickness.
(8) Mount lock / tongue flaps: Depending on the size of the tray and / or the thickness of the board.
(9) Friction lock / main dust wing (sealing ailerons) angle: generally 15.
(10) The amount of joint compression: usually 0.8mm or cardboard thickness.
(11) Fully or partially overlapping the sealed box bottom I Dust guard (sealing aileron) Shoulder: Varies according to size.
(12) Full or partial overlap seal bottom / main dust guard (seal ailerons) Angle: generally 45
(13) Full or partial overlap seal box bottom / secondary dust guard (seal ailerons) Angle: generally.
(14) Fully or partially overlapping sealed box bottom / optional Dust flap (sealing ailerons) Details: Normally 15.
(15) Partially overlapping sealed box bottom: generally 1/2 width plus 9mm-10mm.

http://www.guangjupaper.com/